Jobs can be submitted from WranglerView using the items under the Submit menu. Selecting one will launch a modal submission dialog with the standard framework and job-specific parameters. Specify the fields and then press the "Submit" button to submit the job to the Qube! Supervisor.
Submissions for specific applications, such as Maya and Nuke, are explained in detail in their own sections. Please refer to that documentation for submissions to individual applications. This page documents the complete set of parameters; specific submission targets do not use all the parameters defined here.
There is a common set of buttons located at the bottom of the Submission Dialog.
- Set Defaults: Store as defaults in the User Preferences for that Jobtype, the values listed in the current submission dialog. The interface will use those values the next time the dialog is opened. This allows you to specify common fields like Priority or Executable that should always be the same value.
- Clear Defaults: Remove any stored defaults for that Jobtype submission dialog
- Expert Mode: Toggle button to display or hide export and non-default values from the submission dialog to reduce clutter when there are a lot of parameters. The current state of this toggle is stored in the Preferences Dialog.
- Save [Disk Icon]: Store the current properties of the job from the dialog as a file (by default an XML file). This can be used to submit through the WranglerView at a later time with "Submit->File…" or from the command line with the
qbsubcommand, or via the API.
- Cancel: Cancel the job submission and close the dialog.
- Submit: Submit the job with the specified parameters to the Qube! Supervisor.
Basic Parameters for all Jobs
- Name: name used for the job, usually artist specified.
- Priority: priority of the job. A number between 1 and 9999. Lower numbers mean higher priority.
- Instances: The number of processes (or subjobs) to run the job with at the same time. When rendering, this equates to the number of frames being rendered at the same time.
Render Thread and Job Reservation Controls
This section is located near the top of the submission UI, and is collapsed when 'Expert Mode' is not selected. For applications that do not support setting the number of threads, this section is not visible at all.
Enabling 'Expert Mode' at the bottom of the UI will open this field up
Thread Control Behavior
Checking Use All Cores for applications or renderers that support auto-detection of the number of cores installed on a worker host will set the renderer's appropriate control to enable this feature. In the case of a Maya job, it sets renderThreads=0; for the Mentalray renderer, it sets autoRenderThreads=True. It will try to "do the right thing" for each application where this control is visible.
Checking Render on all cores will also sets the job's reservation string to reserve all cores: you will set a "+" at the end of the host.processors=N+ . This means "only start on a worker with N free slots, but reserve them all, so that no other jobs will start on this worker while I'm running on it". The Min Free Slots value will affect the value of N, so setting it to 4 will say "start only on a worker with 4 free slots".
Render on all cores also disables the bottom-half of this section, Specific Thread Count and Slots=Threads, whose behavior is explained below.
Setting Specific Thread Count, on the other hand, does not necessarily reserve all the cores on the worker, it only sets the renderer's particular number of threads control, in Maya's case it's Render Threads:
But you will notice that the job's reservations have not changed, and is probably still at the default value of host.processors=1. This is to support workers which are configured for fewer slots than they have cores.
The Slots=Threads control will link the job reservations to the thread count, so a 4-threaded job will reserve 4 worker slots. It also disables the Render on all cores and Min Free Slots controls.
As you change the Specific Thread Count control the reservations value will automatically update.
Parameters for Cmdline Jobs
- Command: The command to run on the Worker. Paths and syntax should be what the Worker's OS expects, not the submitting machine.
- Shell (Linux/OS X): Specify the shell to use when executing the command line on the Worker. Only visible in Expert Mode.
Parameters for Cmdrange Jobs
- Command: Same as the Cmdline Job, though it will substitute the following strings based on the frame being executed for the given task.
- Range: The frame range to execute.
- Individual Frames
- Chunks with n Frames
- Split into n Partitions
- Ordering: Specify whether tasks should be executed in ascending, descending, or binary sort (first, last, middle, split the middle values, …) order.
Parameters for SimpleCmd Jobs
- All the fields for either Cmdline or Cmdrange jobs (see above), plus
- Cmd Template: String used to construct the command line along with the rest of the job parameters. Python string representations are used, e.g. %(val)s to represent the string value from "val". If listed, %(argv)s places all optional arguments at that location instead of at the end. This constructs a command line that is then used by the Cmdline or Cmdrange jobtypes on the Workers. See above for the string replace values for CmdRange.
- Executable – path to the renderer or executable to run. Unless it is in the path on the Worker's environment, this needs to be set to an absolute path (to where the executable is located on the Worker)
Qube Worker Selection
Explicit list of Worker hostnames that will be allowed to run the job (comma-separated).
Explicit list of Worker groups that will be allowed to run the job (comma-separated). Groups identify machines through some attribute they have, eg, a GPU, an amount of memory, a license to run a particular application, etc. Jobs cannot migrate from one group to another. See worker_groups.
Explicit list of Worker hostnames that are not allowed run the job (comma-separated).
Explicit list of Worker groups that are not allowed to run the job (comma-separated).
Clusters are non-overlapping sets of machines. Your job will run at the given priority in the given cluster. If that cluster is full, the job can run in a different cluster, but at lower priority. Clustering
Order to select Workers for running the job (comma-separated) [+ means ascending, - means descending].
Host Order is a way of telling the job how to select/order workers
Worker properties needed to be met for job to run on that Worker (comma-separated, expression-based). Click 'Browse' to choose from a list of Host Order Options.
Requirements is a way to tell the workers that this job needs specific properties to be present in order to run. The drop-down menu allows a choice of OS:
You can also add any other Worker properties via plain text. Some examples:
With integer values, you can use any numerical relationships, e.g. =, <, >, <=, >=. This won't work for string values or floating point values. Multiple requirements can also be combined with AND and OR (the symbols && and || will also work).
The 'Only 1 of a "kind" of job' checkbox will restrict a Worker to running only one instance with a matching "kind" field (see below). The prime example is After Effects, which will only allow a single instance of AE on a machine. Using this checkbox and the "Kind" field, you can restrict a Worker to only one running copy of After Effects, while still leaving the Worker's other slots available for other "kinds" of jobs.
Worker resources to reserve when running job (comma-separated, expression-based).
Reservations is a way to tell the workers that this job will reserve the specific resources for this job.
Restrict job to run only on specified clusters ("||"-separated) [+ means all below, * means at that level]. Click 'Browse' to choose from a list of Restrictions Options.
Restrictions is a way to tell the workers that this job can only run on specific clusters. You can choose more than one cluster in the list.
Qube Advanced Job Control
List of submission flag strings (comma separated). Click 'Browse' to choose required job flags.
|See this page for a full explanation of flag meanings|
Wait for specified jobs to complete before starting this job (comma-separated). Click 'Add' to create dependent jobs.
You can link jobs to each other in several ways:
The second menu chooses between "job" (the entire set of frames) and "work" (typically a frame). So to link frame 1 of one job to frame 1 of a second, job, you would choose "work" in this menu. If you want to wait for all the frames of one job to complete before starting a second, then choose "job". The other option, "subjob", refers to the instance of a job. This is much less common, but means that, for example, the instance of Maya that was running frames has completed.
For a complete description on how to define complex dependencies between jobs or frames, please refer to the Callbacks section of the Developers Guide.
Email (job complete)
Send email on job completion (success or failure). Sends mail to the designated user.
Email (failed frames)
Sends mail to the designated user if frames fail.
Set initial state of job to "blocked".
Redirect and consolidate the job stderr stream to the stdout stream. Enable this if you would like to combine your logs into one stream.
Optional label to identify the job. Must be unique within a Job Process Group. This is most useful for submitting sets of dependent jobs, where you don't know in advance the job IDs to depend on, but you do know the labels.
Arbitrary typing information that can be used to identify the job. It is commonly used to make sure only one of this "kind" of job runs on a worker at the same time by setting the job's requirements to include "not (job.kind in host.duty.kind)". See How to restrict a host to only one instance of a given kind of job, but still allow other jobs
Job Process Group for logically organizing dependent jobs. Defaults to the jobid. Combination of "label" and "Process Group" must be unique for a job. See Process group labels
Number of times to retry a failed frame/job instance. The default value of -1 means don't retry.
Retry Work Delay
Number of seconds between retries.
Kill the subjob process if running for the specified time (in seconds). Value of -1 means disabled. Use this if the acceptable instance/subjob spawn time is known.
Kill the agenda/frame if running for the specified time (in seconds). Value of -1 means disabled. Use this if you know how long frames should take, so that you can automatically kill those running long.
Qube Job Environment
Current Working Directory to use when running the job.
Environment variables override when running a job. You can specify key/value pairs of environment variables
This is useful when you might need different settings for your render applications based on different departments or projects.
You can specify which user you would like to submit the job as. The default is the current user. The format is simply <username>. This is useful for troubleshooting a job that may fail if sent from a specific user.
Setting "josh" would attempt to submit the job as the user "josh" regardless of your current user ID.
Note: In order to do this, the submitting user must have "impersonate user" permissions.
Qube Output Parsing and Validation
An optional basic file size check for the cmdline/cmdrange simplecmd framework jobtypes provides basic image validation if the path to the image can be determined. If an image is identified from parsing the stdout or stderr from a cmdline/cmdrange job (or any job using the simplecmd framework), it can have rudimentary validation automatically performed on it to make sure that it is valid.
For this to work, the regex_outputPaths submission parameter needs to be specified for it to parse the stdout/stderr of the job for images, or manually specifying the job frame's path (in Python the paths are represented by jobFrame['resultPackage']['outputPaths']).
Min File Size
Used to test the created output file to ensure that it is at least the minimum size specified. Put in the minimum size for output files, in bytes. A zero (0) disables the test.
Used to add highlights into logs. Enter a regular expression that, if matched, will be highlighted in the information messages from stdout/stderr.
Used to catch errors that show up in stdout/stderr. For example, if you list "error: 2145" here and this string is present in the logs, the job will be marked as failed. This field comes pre-populated with expressions based on the application you are submitting from. You can add more to the list, one entry per line.
Regular expression for identifying outputPaths of images from stdout/stder. This is useful for returning information to the Qube GUI so that the "Browse Ouput" right-mouse menu works.
Regular expression for identifying in-frame/chunk progress from stdout/stderr. Used to identify strings for relaying the progress of frames.
Maximum number of lines to store for regex matched patterns for stdout/stderr. Used to truncate the size of log files.
Select this option to create a secondary job that will wait for the render to complete then combine the output files into a movie.
Note: For this to work correctly the "Qube (ImagesToMovie) Job..." has to be setup to use your studios transcoding application.
- Login: login username for Shotgun
- Task: Shotgun task
- Project: Shotgun project
- Shot/Asset: Shotgun shot/asset
- Version Name: Shotgun version template. Performs variable substitution using python format %(key)s to get the value. The dict keys are prefixed with "job.", "package.", and "shotgun." respectively.
- Description: Shotgun description. Performs variable substitution using python format %(key)s to get the value. The dict keys are prefixed with "job.", "package.", and "shotgun." respectively.
Arbitrary accounting or project data (user-specified). This can be used for creating tags for your job.
You can add entries by typing in the drop-down window or select already created accounts from the drop-down.
See also Qube! Job Tags
Freeform text for making notes on this job. Add text about the job for future reference. Viewable in the Qube UI.