1. Qube
2. _InclusionsLibrary
3. _SimpleCMD_ParametersMaxwell

_SimpleCMD_ParametersMaxwell

maxwell path
The explicit path to Maxwell v2 executable on the Workers.

Enable CoOp Renders
Perform a cooperative render. Setting this to co-op will create a secondary MXIMerge job that combines the finished MXI's upon completion. Make sure you set the "Instances" parameter to more than 1, in the "Qube Job Basics" section above.

Coop Total SL
If CoOp rendering is selected above, this sets the sampling level for the final render, when the MXIs are all merged. Set to 0 to have all instances respect the value set in the "Sampling Level" box below.

Sampling Level
Override the render quality level set in the MXS.

Render Time Limit
Time (in minutes) that the renderer is allowed to run (per-frame), overrides the Time value saved in MXS.

Resume Rendering
Automatically resume the render if the MXI file exists.

MXS scene file
The MXS scene to render. This is a required field for submission. Important: Make sure that the Workers have access to this file path.

outputImage
This will override the full path and name of the image file specified in the MXS scene. Important: Make sure that the Workers have access to this file path.

MXI output file
The MXI output file containing information about the rendering process.  This allows for resuming a previously rendered image.  If not specified, the MSI will use the same name and path as the MXS scene.

script
Names a script to load and run on the Worker(s).

prescript
Names a prescript to load and run on the Worker(s).

postscript
Names a postscript to load and run on the Worker(s).

bitmaps
Set an alternative folder path for the location of the bitmaps. If set to "0", it will discard all the bitmaps.

overridemat
Override all the materials in the scene using the materials found at the given path. Make sure that path is visible to all the Workers.

curdir
Set the current directory during the render. This is useful where relative paths are used to locate textures and other dependencies.

dependencies
Set an alternative folder path for the dependencies location.

resume
This resumes a previously rendered image and update the MXI file.

renameoutput
When this flag is used, Maxwell Render does not write the MXI file directly to the given output path; instead, it will write to a temporary file and then rename/move the result to the final path.

res
Overrides the scene resolution defined in the file. Format is WxH, e.g., 800x600

region
Describes a region type to render, along with its coordinates. The format is "type,x1,y,x2,y2" where "type" is one of "full", "region" or "blowup" and "x1,y1,x2,y2" are the coordinates of the rectangular region to render or enlarge.

depth
Overrides the image depth settings in the scene file.

channels
Overrides the channels that Maxwell will export, as defined in the scene file. Possible channels are r, a, ao, s, m, i, zmin, zmax.

channel
Overrides each exported channels export status and format. The format is [channel_name],[on|off],[depth(8,16,32)],[format]. All the parameters are optional except for the first one. Examples: channel:alpha,on,32,tif... channel:material... channel:object,off

zmin
Overrides the zmin values of the zbuffer channel.

zmax
Overrides the zmax values of the zbuffer channel.

alphaopaque
Enable opaque mode in the alpha channel.

alphaembedded
Enables embedded alpha.

embedded
Embeds the selected channel when the output format allows it.

channelsembedded
Enable/disable embedding all the channels as images layers if the format supports it.

color
Overrides the color space setting in the scene file.

camera
Specifies a camera to render. If not specified, will default to the active camera.

defaultmat
Overrides the path to the default materials.

burn
Overrides the burn value set in the scene file.

gamma
Overrides the gamma value set in the scene file.

pass
Overrides the render pass that is set in the scene file.

multilight
Enables the multi-light function for storing an MSI file with separate information about the emitters.

extractlights
If this is enabled, each light will be saved in a separate file.

devignetting
Overrides the scene file's setting (or default) for the devignetting value.

scattering
Overrides the scene file's setting (or default) for the scattering value.

displacement
Enables the displacement calculations for the whole scene. Not necessary if not already set in the scene file.

dispersion
Enables the dispersion calculations for the whole scene. Not necessary if not already set in the scene file.

motionblur
Enables motion blur calculations for the whole scene. Not necessary if not already enabled in the scene file.

dodevignetting
Enables devignetting for the whole scene. Not necessary if not already enabled in the scene file.

doscattering
Enables lens scattering. Not necessary if not already enabled in the scene file.

verbose
Verbosity level. Choose the level of detail you would like the logs to provide.

threads
The number of threads to render with (0 means use the maximum available).

priority
The Maxwell Renderer process priority.

slupdate
The number of seconds between sampling refreshes. If not set, the engine will choose an interval automatically.

mintime
Set the time to impose a minimum time for saving MXI files to disk. This is the equivalent of the preference "Min.Time"

nomxi
Force Maxwell Render to save only the output image, and not the MXI file.

Internal(Range)
Sequence of frames to render, overriding the scene settings. The format is comma-separated frames and frame ranges. For example, 12,21-30,99-102 would render frame 12, frames 21-30, and frames 99-102.